Microwave Motion Sensors

Microwave Motion Sensors with 5 Year Warranty

YW101: ON/OFF Motion Sensor

Microwave Radar Motion Sensor with Master/Slave Control

The benefits of microwave radar motion sensor with master/slave intelligent lighing controls is the brightness and hold time of the LED lights in the same zone can be changed simultaneously to save in energy consumption.

>> Feature Highlights

Widely used in led lighting in corriddor, staircase and hallway.
DIP switch of detection area, hold time and daylight threshold.
Incorporating phptocell technology.
5.8Ghz C-band microwave motion sensor, ON/OFF control.
Dimensions: L64mm x W38.5mm x H25mm
Optional Rated Load: 1200W or 300W @200-240VAC

>> Intelligent Lighting Management

Master/Slave Group Control ( Corridor Function)
RF Wireless Mesh Control (Swarm Intelligence)
DALI Lighting Control
Daylight Harvesting (Constant Lux)
Human Presence Detector Technology
No Back Detection (180° Detection)
Absence Presence Detection
Dry Contact Connection

>> Technical Specifications

Model	YW101	Operating Voltage	85VAC-230VAC
Detection Area	25%/ 50%/ 75%/ 100%	Rated Load	1200W @200-240VAC ; 600W@110VAC
Hold Time	5s/ 30s/ 3min/ 10min	Mounting Height	Max. 5m ( Ceiling Mounted); Max. 3m (Wall Mounted)
Daylight Threhold	5Lux/ 20Lux/ 100Lux/ Disable	Detection Range	Max. 10m
Detection Angle	Ceiling 360°； Wall 180°；	Operating Temperature	-25℃ ~ +60℃
Power Consumption	＜0.5W	IP Rating	IP20

>> Function Demo:

>> Master/Slave Group Control (Corridor Function):

Master slave group control is widely used in indoor lighting, like corriddor, staircase and hallway etc. Combining with 5.8Ghz doppler radar technology, microwave motion sensors can facilitate group control by dividing areas into zones and dim the lights according to presence detection. With master/slave light control, all the controller’s sensor status, distance, time, brightness etc. in the same grouping can be synchronized to the same. Furthermore, the parameters of microwave motion detector can be directly set by DIP switch.

RF wirelress mesh communication protocol can be added if it’s used in car parking appllication.

>> Wiring Diagram

Introducing our YW101 microwave motion sensor with intelligent master/slave light management. With the switching of N terminal, it’s more convenient for installer to choose microwave motion model or normal ON/OFF model according to the actual application.