Microwave Motion Sensors

Microwave Motion Sensors with 5 Year Warranty

YW101: ON/OFF Motion Sensor

ON/OFF Microwave Motion Sensor Light Switch with Daylight Threshold

Microwave motion sensors can automatically switches on/off light based on motion and ambient light level. A microwave sensor uses high frequency radio waves operating at 360 degrees, which can penetrate through doors, glass and thin walls.

>> Feature Highlights

Widely used in most luminares, like indoor lighting etc.
DIP switch of detection area, hold time and daylight threshold.
Zero crossing protection to prevent the sensor relay against the high inrush current of led drivers
Concealed installation insides luminaires.
Smart Controls & Connectivity
5.8Ghz C-band microwave motion sensor, on off control
Dimensions: L64mm x W38.5mm x H25mm
Optional Rated Load: 1200W OR 300W @200-240VAC

>> Intelligent Lighting Management

Master/Slave Group Control ( Corridor Function)
RF Wireless Mesh Control (Swarm Intelligence)
DALI Lighting Control
Daylight Harvesting (Constant Lux)
Human Presence Detector Technology
No Back Detection (180° Detection)
Absence Presence Detection
Dry Contact Connection
Bluetooth IOT Wireless Control

>> Technical Specifications

Model	YW101	Operating Voltage	85VAC-230VAC
Detection Area	25%/ 50%/ 75%/ 100%	Rated Load	1200W @200-240VAC ; 600W@110VAC
Hold Time	5s/ 30s/ 3min/ 10min	Mounting Height	Max. 5m ( Ceiling Mounted); Max. 3m (Wall Mounted)
Daylight Threhold	5Lux/ 20Lux/ 100Lux/ Disable	Detection Range	Max. 10m
Detection Angle	Ceiling 360°； Wall 180°；	Operating Temperature	-25℃ ~ +60℃
Power Consumption	＜0.5W	IP Rating	IP20

>> Function Demo:

>> Master/Slave Group Control (Corridor Function):

Suppose one luminaire is a Master and the others are Slave. In this case, the Master luminaire will be equipped with microwave motion sensor, but the Slave luminaire won’t have a sensor. A sensor connected to the Master luminaire will control both the Master itself and all Slave luminaires connected to it at the same time. When the master luminaire detects the motion from any direction and switchs on, the slave luminaires in one group will be triggered simultaneously.

>> Wiring Diagram

Introducing our YW101 microwave motion sensor with master/slave group control. What sets our microwave motion sensors apart from others is the inclusion of an additional L terminal, allowing you to “disable” all features of the microwave sensor when it is not needed.